Wandplatte kalte Farbe Stahlbrötchenformmaschine
Minimum der Bestellmenge: | 1 Set/Sets |
---|---|
Lieferzeit: | 1 Tage |
Verpakung: | Wellblecher Maschine, Hauptkörper nackt in Behälter geladen, mit Plastikfilm bedeckt, Ersatzteile in Holzbox oder wie es erforderlich ist. |
---|---|
Versorgungsmaterial-Fähigkeit: | 30 Set/Sets per Month corrugated tile machine |
Hafen: | TianJin |
Produktbeschreibung
Type | color steel roll forming machine |
Material Spec | colored steel sheet, galvanized steel sheet |
Main motor power |
4.0kw |
Forming speed: |
8-10m/min |
Diameter of roller | 70 millimeter |
Thickness of Coil Sheet |
0.3-0.8 millimeter |
The width of the colored sheet | 1000 millimeter |
The effective of steel sheet | 910 millimeter |
Hydraulic station pressure | 3 kw |
Hydraulic pressure | 10 - 12Mpa |
Total Weight |
2.5ton |
Voltage | 380 volt |
Roll stand | 10 groups |
PLC |
Computer adopt PLC, Mitsubishi FX-IS series |
Roller material: | high grade No.45 forged steel, plated hard chrome on the surface of roller with thickness 0.05 millimeter |
ROTARY ENCODER | OMRON |
Material of cutter | Cr12 |
No |
|
Technical Specification |
1 |
Manual Uncoiler |
Usage:It is used to support the steel coil and uncoil it in a turnable way. The steel coil is uncoiled by hand. Loading capacity:1.2T,Inner diameter: 500-508mm |
2 |
Feeding Table |
Put the raw material(steel plate) through the beach to manufacture and process, it can guarantee that the products are neat, parallel and everything is uniformity. Please refer to the equipment regulation to know the function of locate angle iron. |
3 |
Main Roll Forming Machine |
Material of rollers:45# steel,roller surfaces polishing, hard plating , The polished surface and the heat treatment towards the molds also can keep the molding plate surface smooth and not easy to be marked when it is being stamped |
4 |
Hydraulic System Computer Control Cabinet |
Power:5.5kw,Hydraulic oil: 40# hydraulic oil into the hydraulic oil tank ,the pump drive the cutter machine to begin the cutting job. The target piece`s length is adjustable and digit of it can be adjusted. Computed mode has two modes: automatic and manual one. The system is easy to operate and use PLC:EURA |
5 |
Shearing Mechanism |
It adopts the hydraulic drive and automatic location to decide the dimension and cut the target products. Material of blades: Cr12,quenching treatment |
6 |
Output Table
|
It adopts welded steel and supported roller to transmit the products,which is used to collect the finished products. |
Produktgruppe : Rollformmaschine > Wellbleche Formungsmaschine
Premium Related Products