Metallstahl -Autobahn -Weitkleinemaschine
Minimum der Bestellmenge: | 1 Set/Sets |
---|---|
Lieferzeit: | 1 Tage |
Verpakung: | Autobahnformmaschine 1). Ziehen Sie mit Stahldrahtseil und Schweißmaschine mit Behälter durch Angel Iron 2 an. Hauptformmaschine und Uncoiler sind nackt (wenn Sie benötigen, können wir auch mit wasserdichtem Kunststoff verpackt) 3). Plc Contral System und |
---|---|
Versorgungsmaterial-Fähigkeit: | 5 Set/Sets per Month highway |
Hafen: | tianjin new port |
Produktbeschreibung
Type |
highway guadrail roll forming machine |
Material Specific |
colored steel sheet, galvanized steel sheet |
Main motor power |
11 kw |
Forming speed |
6-8m/min |
Diameter of roller |
Φ70 millimeter |
Thickness of Coil Sheet |
0.3-0.7 millimeter |
The width of the colored sheet |
1250millimeter |
The effective of steel sheet |
1122 millimeter |
Hydraulic station pressure |
3 kw |
Hydraulic pressure |
10 - 12Mpa |
Total Weight |
about 3.5ton |
Voltage |
380V3 phase 50Hz |
roll stand |
11 groups |
PLC |
Computer adopt PLC, Mitsubishi FX-IS series |
Size length*width*high |
5.6m*1.3m*1.2m |
Roller material: |
high grade No.45 forged steel, plated hard chrome on |
Frequency converter |
containing |
Computer operating screen |
MT6056 from Taiwan, touch screen |
Active shaft material |
High grade No. 45 carbon wrought steel at diameter 70mm |
Material of cutter |
Cr12 mould steel with quenched treatment |
No |
|
Technical Specification |
1 |
Manual Uncoiler |
Usage:It is used to support the steel coil and uncoil it in a turnable way. The steel coil is uncoiled by hand. Loading capacity:1.2T,Inner diameter: 500-508mm |
2 |
Feeding Table |
Put the raw material(steel plate) through the beach to manufacture and process, it can guarantee that the products are neat, parallel and everything is uniformity. Please refer to the equipment regulation to know the function of locate angle iron. |
3 |
Main Roll Forming Machine |
Material of rollers:45# steel,roller surfaces polishing, hard plating , The polished surface and the heat treatment towards the molds also can keep the molding plate surface smooth and not easy to be marked when it is being stamped |
4 |
Hydraulic System Computer Control Cabinet |
Power:5.5kw,Hydraulic oil: 40# hydraulic oil into the hydraulic oil tank ,the pump drive the cutter machine to begin the cutting job. The target piece`s length is adjustable and digit of it can be adjusted. Computed mode has two modes: automatic and manual one. The system is easy to operate and use PLC:EURA |
5 |
Shearing Mechanism |
It adopts the hydraulic drive and automatic location to decide the dimension and cut the target products. Material of blades: Cr12,quenching treatment |
6 |
Output Table
|
It adopts welded steel and supported roller to transmit the products,which is used to collect the finished products. |
Produktgruppe : Autobahn -Leitplanke Forming Machin